Oxa Cube Solo Hyperbaric Oxygen Chamber (HBOT, Single)
A single-user steel cabin with a high-transparency acrylic door, built-in comfort interior and a 10 L/min oxygen generator.
Single-user hyperbaric oxygen chamber rated 2.0 ATA, with a steel cabin, high-transparency acrylic door and a 10 L/min oxygen generator.
Architectural Design & Therapeutic Intent
The Oxa Cube Solo is a single-user hyperbaric oxygen chamber rated at 2.0 ATA. The cabin is made of SPCC carbon steel plate, square steel and ABS, and measures 1900 × 900 × 1950 mm.
The door is a 30 or 40 mm high-transparency acrylic panel. Inside, the cabin is fitted with wall panels, sofa and interior upholstery, air conditioner, lighting, a nasal spray device and an intelligent control panel. A separate oxygen generator supplies 10 L/min at 93% ± 3% concentration.
Working pressure inside the cabin is adjustable from 10 kPa to 50 kPa, with safety systems and dual-screen touch control. This product requires a regulatory check and a trained operator.
Pressurised Cabin with Oxygen Concentrator
A sealed steel cabin is pressurised with filtered air from an oil-free compressor, while a separate PSA oxygen generator supplies the oxygen source.
- 1Cabin pressurised to the stated ATA rating.
- 2Controlled boost and release rates (≤ 4 kPa/min up, ≤ 12 kPa/min down).
- 3PSA oxygen generator at 93% ± 3% concentration.
- 4Manual relief valve, emergency switch and automatic safety valve.
Engineered Capabilities & Advanced Controls
Multiple Safety Systems
Manual pressure relief valve, emergency switch and automatic safety valve.
Dual-Screen Control
Capacitive touch controls inside and outside the cabin.
Comfort Interior
Fitted with wall panels, sofa and interior upholstery, air conditioner, lighting, a nasal spray device and an intelligent control panel.
Intercom & Lighting
Dual-mode intercom and 12 V LED lighting.
Quiet Operation
Internal noise ≤ 45 dB.
Modular Assembly
Modular build for easier delivery and installation.
Evidence-Based Biological Benefits
Controlled Pressurisation
Gradual boost and release rates.
Quiet Cabin
≤ 45 dB inside.
Full Technical Specifications
Cabin Specifications6 Parameters Calibrated
Turnkey Delivery & Included Components
Recommended Session Protocols
Calibrated to maximize therapeutic outcome without triggering biological exhaustion.
Cumulative regenerative benefits compound with consistent weekly integration.
- •Hyperbaric chambers must only be installed and operated in line with local regulations, by a trained operator, following the manufacturer's safety procedures.
- •Not suitable for everyone. A medical professional should confirm that a person is suitable before any session.
Step-by-Step Operator & User Procedure
Pre-Session Checklist
- Confirm local regulatory requirements are met and the operator is trained.
- Check the safety valves, emergency switch and intercom before every session.
Session Execution Steps
Run the operator's safety checklist and confirm the user is suitable.
Pressurise gradually and monitor via the intercom and control panel.
Release pressure at the controlled rate before opening the door.
Turnkey Facility Integration
Longevity & Wellness Centres
A supervised pressurised-cabin service within a wellness menu.
Clinics (where regulations permit)
Installed and operated only in line with local requirements.
